After install i have to fix boot that have the error "Still waint for the toor device" with this tip and Voilá!

Intel VT solves the question, but not all people have this option, like myself in my note, at home, etc…
For true, i only have ONE (1) machine with hardware virtualization….

:-(

I installed leo4all, but it won't boot.

Here is screen shot:
http://img257.imageshack.us/my.php?image=dsc00601si7.jpg

Any ideas?

Thank you :)

Install seems to go very smoothly until it is near completion (it says 2 minutes left) and then it completely freezes, unable to do anything.

Specs:
AMD Athlon 64X2 3.0GHz 6000+
EVGA Nvidia 7600GT 256 MB x2 (They are SLI'd together)
ASUS M2N-SLI Deluxe Mobo
4GB PC6400 800MHz DDR2 (2x1GB Corsair, 2x1GB Crucial)
Samsung 150GB HD 7200RPM (1st Master IDE)
Samsung Writemaster CD/DVD+/-RW SATA
USB Mouse and Keyboard (Logitech MX518, Saitek Eclipse II)

I have these connected as well—one has XP installed and the other is Windows formatted. I have no intention of using these for OSx86:
Seagate 320GB 7200RPM SATA (System Disk)
Hitachi 500GB 7200RPM SATA

I also have a floppy disk/memory card reader connected (via FDD cable to mobo and internal USB connection for the card reader). I'll probably unplug these if I can't find a fix…

I feel as if I installed the correct drivers. Please correct me if I'm wrong:
Kernal 9.2.2 (I tried this first, then tried 9.2.0, resulted w/ freeze as well)
Nforce Test (my SATA DVD drive was working so I assumed to use this)
AC97 Audio (my comp supports both HD Audio and AC97)
Nvidia
ForceDeth-V

Left ACPI section blank (this installs 1.1.0 by default, no?)
Chose DDR800 for AppleSMBIOS
Chose to Keep FireWire
Left Power Management Blank
AMD System Fix is chosen (grayed out and selected)
Bootloader is grayed out and selected

Before the first install I allowed the installer to verify my installation disk, and there were no problems. The second time I skipped it, with the same results.

Any help or ideas would be greatly appreciated. Thanks for your time.

I was not successful at loading the install disc, not even the boot options section. So I am wondering
if the ppf patch suppose to work for a Leo4Allv2 DVD?

**NOTE:
Using the V2 disc install works fine, but is not stable enough for me to use more then five minutes (reboots randomly.)

Its a real tease. :).

can anyone help?

HELPFUL INFORMATION

Leo4Allv2 (MD5: 6d4e68afb3486baec03b446fb0a5d711)
Leo4allv3 10.5.3 ppf patch

AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
MSI K8N NEO4-F Motherboard (‎CK804 SMBus)

Maxtor 320gb Hard drive (IDE) - 2 Partition: First OSX and Second Ubuntu (EXT3)
Western Digital 160gb Hard drive (SATA) EXT3 Filesystem

Samsung 2 GB DDR
ATI Radeon X300SE (PCI Express)
Microsoft Digital Media Pro Keyboard (USB)
Microsoft IntelliMouse Optical (USB)
SAA7130 Video Broadcast Decoder (PCI TV CARD)
CK804 AC'97 Audio Controller
ADMtek NC100 Network Everywhere Fast Ethernet 10/100
VIA ‎IEEE 1394 Host Controller

first of all: best release ever. stable as hell and running smooth :)
BUT: i have an IDE DVD Drive which i used to boot from and install leo4allv3 from. everything ok. after reboot and first boot via hdd, mac cant find my DVD drive. systemp profiler see nothing. i didnt changed anything in Bios or something.

windows find the drive without problems.

please help me, because this is the only thing that hinder me having the perfect system :)

thnx a lot

specs:
amd x2 am2 5000+ BE
msi k9a with SB600 ati motherboard
ati x1900xt
LG DVD IDE Drive
3x SATA HDDs

All the loading goes fine and I get to the welcome screen to accept the agreement and continue with the installation. I pick a partition to install on erase it and then create a new partition. Once I'm out of the disk utility I choose that partition after it asks me where to install and I click continue. This is where it goes to the next screen where it verifies the contents of the dvd to make sure everything is right before install I suppose. Well as soon as it starts to read it says it can't verify the contents and asks me to reboot. This is the 6th or 7th time I've reburned this dvd from two different iso images I download and I'm getting the same message. I thought the first iso might have gotten corrupt but it opened in poweriso and burned in poweriso just fine. I even tried burning it with nero and a couple other programs. I also tried at different speeds thinking it needed to be burned slow. Slowest speed was 4x so shouldn't have been no problem. When I burned with nero I asked nero to check the whole dvd after it was burned to make sure all contents were fine each time I burned it and everything went smooth on the burn.

I dunno what the problem is. I thought well maybe my cd-rom is going bad or something of that sort but it installs vista, any linux distro just fine. I've installed many on this laptop playing around and this is the first time I have had something tell me it can't read. I've never been able to install mac on any of my other machines because of compatibility but from the stats of my machine it seems all the hardware is just fine. Just some reason it won't read the contents of the dvd and if I tell it to skip that step it starts to install and it doesn't get far before it says it can't read again and stops. I dunno what is going on I thought you guys may be able to help me out here. I'd greatly appreciate it.

I took a screen shot of my device manager to show the stats of this machine to anyone that it might help out.

I have been trying to install leo4all (and other releases) for awhile now, so far Leo4all has gotten the farthest. When Installing the install fails at about 75% then gives me this message "The installer could not validate the contents of the 'Mail' Package.

Any Ideas? Any help will be much appreciated.

Thanks

HP Pavillion dv6700
Intel Core 2 Duo T5550 1.80GHz
Interl 950 Express Chipset
3GB DDR2 Ram
250GB 5400rpm SATA
Intel Graphics Media Accelerator X3100
SuperMulti DVD±RW with lightscribe
15.4" WXGA+ BrightView Display
5-in-1 Digital Media Reader
802.11b/g WLAN & Bluetooth

p.s. i have an
athlon 3500+
1gb ram
2x200gb hdd
geforce 7600gs 256mb

and my dvd drive is a pioneer dvd-RW DVR-112D

thx!!

Intel DG35EC:
Video: Intel Graphics Media Accelerator 3500
Sound: Intel High Definition up to 6 channels
Network: Intel 10/100/1000 Mbps

Intel P35:
Sound: Intel High Definition up to 8 channels
Network: Intel 82566DC 10/100/1000

ECS P35:
Audio: Realtek 8-channel audio AL883
Network: Intel 82566DC 10/100/1000

-----——
Video Card:

Nvidia GeForce 8400 GS

PLEASE tell me which of these should wear RECOMIENDENME OR ONE PLEASE

I TRIED LEO4ALL V3 ON MY ACER4520 LAPTOP INSTALLATION WAS NOT FINE SO I PATCHED ISO WITH SB600.PPF.AFTER PATCHED INSTALLATION WAS FINE AND LOADS LEOPARD FINE BUT NO ETHERNET/SOUND/WI-FI.PLS HELP ME TO LOAD ALL DRIVERS AND IT WILL VER THANKFULL TO U BECAUSE IAM CRAZY IN MAC,SO PLS GIVE ME DRIVERS FOR MY LAPTOP.I ATTACHED MY LAPTOP DEVICE MANAGER WITH THIS.

Processor:AMD 64 X2 Mobile Technology - Athlon 1.80 GHz, 2x 256 KB L2 cache, supporting AMD PowerNow! technology and AMD HyperTransport technology
NVIDIA nForce 610M (MCP67-MV)
Memory: 1GB RAM Up to 2 GB of DDR2 667 MHz memory, upgradeable to 4 GB3 using two soDIMM modules (dual-channel support)
Graphics:35.81 cms (14.1) WXGA high-brightness (200-nit) Acer CrystalBrite TFT LCD, 1280 x 800 pixel resolution, supporting simultaneous multi-window viewing via Acer GridVista
16 ms response time
NVIDIA GeForce 7000M with up to 896 MB of TurboCache (256 MB of dedicated system memory, up to 640 MB of shared system memory) supporting Microsoft DirectX 9,
PCI Express
Dual independent display support
16.7 million colors
External resolution/refresh rate:
2048 x 1536: 75/60 Hz
1920 x 1440: 85/75/60 Hz
1920 x 1200: 75/60 Hz
1920 x 1080: 100/85/75/60 Hz
1600 x 1200: 120/100/85/75/60 Hz
1600 x 900: 120/100/85/75/60 Hz
1400 x 1050: 85/75/60 Hz
1280 x 1024: 120/100/85/75/60 Hz
1280 x 960: 85/75/60 Hz
1280 x 768: 85/75/60 Hz
1280 x 720: 100/85/75/60 Hz
1024 x 768: 120/100/85/75/60 Hz
800 x 600: 120/100/85/72/60 Hz
MPEG-2/DVD hardware-assisted capability (acceleration)
WMV9 (VC-1) and H.264 (AVC) support (acceleration)
S-video/TV-out (NTSC/PAL) support
Acer Arcade featuring Acer CinemaVision and Acer ClearVision technologies4
Audio Dolby5-certified surround sound system with two built-in stereo speakers
MS-Sound compatible
Built-in microphone
Storage 160 GB hard disk drive
5-in-1 card reader, supporting Secure Digital (SD), MultiMediaCard (MMC), Memory Stick (MS), Memory Stick PRO (MS PRO), xD-Picture Card (xD)
Optical Disk Drive 8X DVD-Super Multi double-layer drive:

Read: 24X CD-ROM, 24X CD-R, 24X CD-RW, 8X DVD-ROM, 8X DVD-R, 8X DVD+R, 6X DVD-ROM DL (double-layer), 6X DVD-R DL (double-layer), 6X DVD+R DL (double-layer), 6X DVD-RW, 6X DVD+RW, 5X DVD-RAM
Write: 24X CD-R, 10X CD-RW, 8X DVD-R, 8X DVD+R, 4X DVD-R DL (double-layer), 4X DVD+R DL (double-layer), 6X DVD-RW, 8X DVD+RW, 5X DVD-RAM
Communication Acer Video Conference1, featuring:
Integrated Acer Crystal Eye webcam, supporting enhanced Acer PrimaLite technology1
Optional Acer Xpress VoIP phone
WPAN1: Bluetooth 2.0+EDR (Enhanced Data Rate)
WLAN1: Acer InviLink and 802.11b/g Wi-Fi CERTIFIED solution, supporting Acer SignalUp
LAN: Gigabit Ethernet, Wake-on-LAN ready
Modem: 56K ITU V.92 with PTT approval8, Wake-on-Ring ready
Dimensions and weight 342 (W) x 247 (D) x 35/38 (H) mm (13.46 x 9.72 x 1.38/1.49 inches)
2.48 kg (5.48 lbs.)
Power Supply ACPI 3.0 CPU power management standard: supports Standby and Hibernation power-saving modes
44.4W 4000 mAh 6-cell Li-ion battery pack 2.5-hour battery life9
3-pin 65 W AC adapter
Input Devices 88-/89-/93-key Acer FineTouch keyboard with 5-degree curve, inverted "T" cursor layout, 2.5 mm (minimum) key travel
Seamless touchpad pointing device with 4-way scroll button 12 function keys, four cursor keys, two Windows keys, hotkey controls, embedded numeric keypad , international language support, independent US and Euro dollar sign keys Empowering Key
Easy-launch buttons: WLAN, Bluetooth1, email, Internet, Acer Arcade Deluxe1
Volume adjustment wheel
I/O Ports ExpressCard/54 slot
5-in-1 card reader (SD, MMC, MS, MS PRO, xD)
Four USB 2.0 ports
IEEE 1394 port
Consumer infrared (CIR) port1
External display (VGA) port
S-video/TV-out (NTSC/PAL) port
Headphones/speaker/line-out jack with S/PDIF support
Microphone-in jack
Line-in jack
Ethernet (RJ-45) port
Modem (RJ-11) port
DC-in jack for AC adapter

Using Mac4allv3
HP Pavilion dv5224nr
Chipset Radeon Express 200m (PCIE)
2gb ddr memory
Turion AMD 2.2Ghz

Any idea/suggestion please let me know..

Thanks so much.

Model Name: Mac
Model Identifier: MacPro3,1
Processor Name: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
Processor Speed: 2.01 GHz
Total Number Of Cores: 1
L2 Cache: 512 KB
CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH MMX FXSR SSE SSE2 HTT SSE3 CX16
Memory: 6 GB
Bus Speed: 200 MHz
Boot ROM Version: Hack.88Z.int.0sh.061193037 (Phoenix Technologies, LTD)
Serial Number: CK157KMHK5B

System Version: Mac OS X 10.5.2 (9C7010)
Kernel Version: Darwin 9.2.2

I have installed 10.5.2 V3 on my asus a8n sli deluxe with 4gb of ram, asus 8800gts 640mb gfx card, amd 4400 cpu etc, the first thing i found is that it's very problematic to get the 8800gts working fine, it took me very long time to install this and still i don't know how i managed it.

I have a 17" samsung lcd monitor and i have it working on 1280x1024 now but still the system crashes sometimes, on 1024x768 it won't crash. so i blame the vga drivers.

Could someone help me remove all the drivers and get them working stable? many thanks in advance for this one.

The second thing is: there all mac pro's work with intel cpu's, is it better to install it on intel systems? like the guide on hack attack, use a asus p5w dh deluxe motherboard with an intel core 2 duo cpu? are there any other motherboards / chipsets wich work without problems?

I really want to build a stable system for use with osx as my main os, please help me choose a good configuration of hardware or solve my crashing amd system.

i have installed the kalyway osx a few days ago but couldn't get my wlan to work. it's a "vivanco wlan pci-card" with a prism54 chipset. so before i install leo4all i would like to know if prism54 is supported by leo4all OR if they were other opportunities to get it to work…?

btw sry for my english, it's not the best but :)

greetz
koocho

I just installed Leo v2 on my Asus c90s laptop (leo3 installs but then hangs on boot). At first glance everything seemed to be working, though I haven't fully tested it yet. There was only one resolution, so I installed NVinject-512.pkg from 0.1.3 folder (others did not work, including the ones for laptops), and after repairing permissions, finally have higher resolution BUT suddenly my internal keyboard is not detecded anymore, whereas before it was working fine. Tried extension repair utility, no luck. I've gone through whole installation process many times (which often crashes and needs serious reformatting) but still the same story.
Any help would be greatly appreciated.

Any ideas on what I'm missing here?

Thanks.