Thank you :)

http://h10025.www1.hp.com/ewfrf/wc/prodinfoCategory?lc=en&cc=us&lang=en&dlc=en&product=3239117

a1610n hp
amd4200+
chipset: GeForce 6150 LE
network adapter: 10/100 Marvell 88EC031
sound: Realtek ALC 888 chipset
Smbios: 667ddr2

if this info isnt complete theres the link of my pc specs

i choose this drivers:
audio: alc850/882/888/889
video: nvidia 6xxx(6150)
network: skge(marvell lan)
smbios

Thanks

Processor: Intel Pentium Dual Core 1.6 GHz
RAM: 2GB
HDD: 120 SATA
WiFi: Realtek 8187B
Audio: Realtek High Defination
Eathernet: Realtak

Detail Discription of my system, Please link below
http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/seriesHomepage.do?service=UK&SERIES_ID=131894

after booting from DVD, F8 i just enter flag

cpus=1

and installation complete successfully.

i selected Vanell_kernel_9.2.0 also tried vanella_kernel_9.2.2

after successfull installation, when my system is going to restart and on that point system freeze.

Please anybody there to help, thnx in advance

localhost kextd[10]: IOKitWaitQuiet() timed out while waiting to write kernel symbols
AppleNForceATA: found 0 units
localhost configd[33]: InterfaceNamer: no network interfaces, could not update platform UUID

I tried uninstalling my video drivers and the same thing happened.

Once again, any advice would be wonderful. I'll keep troubleshooting this…

Install seems to go very smoothly until it is near completion (it says 2 minutes left) and then it completely freezes, unable to do anything.

Specs:
AMD Athlon 64X2 3.0GHz 6000+
EVGA Nvidia 7600GT 256 MB x2 (They are SLI'd together)
ASUS M2N-SLI Deluxe Mobo
4GB PC6400 800MHz DDR2 (2x1GB Corsair, 2x1GB Crucial)
Samsung 150GB HD 7200RPM (1st Master IDE)
Samsung Writemaster CD/DVD+/-RW SATA
USB Mouse and Keyboard (Logitech MX518, Saitek Eclipse II)

I have these connected as well—one has XP installed and the other is Windows formatted. I have no intention of using these for OSx86:
Seagate 320GB 7200RPM SATA (System Disk)
Hitachi 500GB 7200RPM SATA

I also have a floppy disk/memory card reader connected (via FDD cable to mobo and internal USB connection for the card reader). I'll probably unplug these if I can't find a fix…

I feel as if I installed the correct drivers. Please correct me if I'm wrong:
Kernal 9.2.2 (I tried this first, then tried 9.2.0, resulted w/ freeze as well)
Nforce Test (my SATA DVD drive was working so I assumed to use this)
AC97 Audio (my comp supports both HD Audio and AC97)
Nvidia
ForceDeth-V

Left ACPI section blank (this installs 1.1.0 by default, no?)
Chose DDR800 for AppleSMBIOS
Chose to Keep FireWire
Left Power Management Blank
AMD System Fix is chosen (grayed out and selected)
Bootloader is grayed out and selected

Before the first install I allowed the installer to verify my installation disk, and there were no problems. The second time I skipped it, with the same results.

Any help or ideas would be greatly appreciated. Thanks for your time.

I was not successful at loading the install disc, not even the boot options section. So I am wondering
if the ppf patch suppose to work for a Leo4Allv2 DVD?

**NOTE:
Using the V2 disc install works fine, but is not stable enough for me to use more then five minutes (reboots randomly.)

Its a real tease. :).

can anyone help?

HELPFUL INFORMATION

Leo4Allv2 (MD5: 6d4e68afb3486baec03b446fb0a5d711)
Leo4allv3 10.5.3 ppf patch

AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
MSI K8N NEO4-F Motherboard (‎CK804 SMBus)

Maxtor 320gb Hard drive (IDE) - 2 Partition: First OSX and Second Ubuntu (EXT3)
Western Digital 160gb Hard drive (SATA) EXT3 Filesystem

Samsung 2 GB DDR
ATI Radeon X300SE (PCI Express)
Microsoft Digital Media Pro Keyboard (USB)
Microsoft IntelliMouse Optical (USB)
SAA7130 Video Broadcast Decoder (PCI TV CARD)
CK804 AC'97 Audio Controller
ADMtek NC100 Network Everywhere Fast Ethernet 10/100
VIA ‎IEEE 1394 Host Controller

first of all: best release ever. stable as hell and running smooth :)
BUT: i have an IDE DVD Drive which i used to boot from and install leo4allv3 from. everything ok. after reboot and first boot via hdd, mac cant find my DVD drive. systemp profiler see nothing. i didnt changed anything in Bios or something.

windows find the drive without problems.

please help me, because this is the only thing that hinder me having the perfect system :)

thnx a lot

specs:
amd x2 am2 5000+ BE
msi k9a with SB600 ati motherboard
ati x1900xt
LG DVD IDE Drive
3x SATA HDDs

All the loading goes fine and I get to the welcome screen to accept the agreement and continue with the installation. I pick a partition to install on erase it and then create a new partition. Once I'm out of the disk utility I choose that partition after it asks me where to install and I click continue. This is where it goes to the next screen where it verifies the contents of the dvd to make sure everything is right before install I suppose. Well as soon as it starts to read it says it can't verify the contents and asks me to reboot. This is the 6th or 7th time I've reburned this dvd from two different iso images I download and I'm getting the same message. I thought the first iso might have gotten corrupt but it opened in poweriso and burned in poweriso just fine. I even tried burning it with nero and a couple other programs. I also tried at different speeds thinking it needed to be burned slow. Slowest speed was 4x so shouldn't have been no problem. When I burned with nero I asked nero to check the whole dvd after it was burned to make sure all contents were fine each time I burned it and everything went smooth on the burn.

I dunno what the problem is. I thought well maybe my cd-rom is going bad or something of that sort but it installs vista, any linux distro just fine. I've installed many on this laptop playing around and this is the first time I have had something tell me it can't read. I've never been able to install mac on any of my other machines because of compatibility but from the stats of my machine it seems all the hardware is just fine. Just some reason it won't read the contents of the dvd and if I tell it to skip that step it starts to install and it doesn't get far before it says it can't read again and stops. I dunno what is going on I thought you guys may be able to help me out here. I'd greatly appreciate it.

I took a screen shot of my device manager to show the stats of this machine to anyone that it might help out.

I got a problem with audio and video. I have a nvidia 8400 gs 256mb and I can't select any higher resolution than 1024x768. Secondly my audio ( SigmaTel STAC9872AK @ Intel 82801HBM ICH8M ) doesn't work, I wonder which drivers I have to choose at the installation :S

Thanks!

I have been trying to install leo4all (and other releases) for awhile now, so far Leo4all has gotten the farthest. When Installing the install fails at about 75% then gives me this message "The installer could not validate the contents of the 'Mail' Package.

Any Ideas? Any help will be much appreciated.

Thanks

HP Pavillion dv6700
Intel Core 2 Duo T5550 1.80GHz
Interl 950 Express Chipset
3GB DDR2 Ram
250GB 5400rpm SATA
Intel Graphics Media Accelerator X3100
SuperMulti DVD±RW with lightscribe
15.4" WXGA+ BrightView Display
5-in-1 Digital Media Reader
802.11b/g WLAN & Bluetooth

p.s. i have an
athlon 3500+
1gb ram
2x200gb hdd
geforce 7600gs 256mb

and my dvd drive is a pioneer dvd-RW DVR-112D

thx!!

Intel DG35EC:
Video: Intel Graphics Media Accelerator 3500
Sound: Intel High Definition up to 6 channels
Network: Intel 10/100/1000 Mbps

Intel P35:
Sound: Intel High Definition up to 8 channels
Network: Intel 82566DC 10/100/1000

ECS P35:
Audio: Realtek 8-channel audio AL883
Network: Intel 82566DC 10/100/1000

-----——
Video Card:

Nvidia GeForce 8400 GS

PLEASE tell me which of these should wear RECOMIENDENME OR ONE PLEASE

LEO4ALL V3 -

PATA required AppleViaATA kext edit

Intel Core 2 Duo 2.13GHz
2GB DDR Ram
1 400GB SATA Hard Drive (Windows Vista ULT) Dual Booting Using EasyBCD
1 80GB PATA Hard Drive (OSX) had to load on SATA drive then DD to PATA !!
1 DVD+-RW Drive (lists as SuperDrive)
EVGA NVidia GeForce 8800 GT Superclocked - working with NVInject
Onboard LAN - NOT WORKING - added in a PCI Broadcomm based NIC
Onboard Sigmatel Audio - Working after AppleHDA Patcher 1.16 (not 1.17 and up)
Built-In Card Reader - Working
Firewire - Working @ 400
OEM Modem - not tested (removed)
Time Machine, Front Row, and All Software seems to have worked so far.
All updates installed (except 10.5.3, not brave enough to try)
~edit~ Forgot tomention - the AverTV Combo tuner NOT WORKING !!